Motion capture data can be previewed in OpenSim to verify that preprocessing was done correctly and that data is in agreement with the intended model. See Preparing Your Data for more information about how to import your data into OpenSim. In some cases, you can also use OpenSim's feature for Associating Data with a Motion. For example, if you've already run IK and you want to visualize marker data or ground reaction forces in sync with the inverse kinematics trial you should use the Associate Data motion feature.

If you have multiple files representing different pieces of data, this tool allows you to verify that the data was transformed consistently. Since the goal is to ensure that the data is consistent with an OpenSim model for further analysis, this module handles data files in the format accepted by OpenSim tools. The two types of data currently handled are marker trajectories (contained in .trc files) and measured forces (contained in .mot files), described earlier.  The topics covered in this section include:

Using the Data Previewer

To choose the motion capture data file to be visualized, select Preview Experimental Data… from the File menu (Preview Motion Data in 3.0.1 and earlier versions of OpenSim). Once selected, OpenSim performs the following actions:

• Adds a new model to the Navigator with the default name of "ExperimentalData" and a unique number so that multiple data files can be uniquely identified. The model has no display-offset in the GUI to be faithful to the data.
• Makes the loaded motion capture data file the current motion.

This enables you to perform the following tasks:

• Use the motion slider in the toolbar to go through different frames
• Synchronize the motions from different motion files. These other motions could be either motion capture files or results from OpenSim tools. For example, marker trajectories and ground reaction forces can be synchronized and superimposed on the result of a forward simulation.

Visualizing Experimental Markers in OpenSim

Marker trajectories are expected to be contained within a .trc file. The ExperimentalData model will contain the loaded motion file (e.g., subject01_walk1.trc) with marker data. The Markers node will list each individual marker found in the file (figure below). Nodes corresponding to individual markers have the following options, accessible by right-clicking the mouse:

• Show: Enabled only if a marker is hidden
• Show Only: Hides all other markers except for those selected
• Hide: Hides the display of selected marker(s)

In addition, the following functionality is supported:

• Double clicking a specific marker node in the navigator, highlights the corresponding visual with a selection box in the Visualizer Window.
•  Selecting a marker in the Visualizer Window highlights the corresponding node in the Navigator tree.

 
Navigator View of a Trajectory Data File

Visualizing External Forces in OpenSim

External forces (such as ground reaction forces) in OpenSim are contained in a .mot file. The header of the selected force (.mot) file is the same as that expected by OpenSim tools.

For the ground reaction forces used by the gait model, the column labels are shown below (for 2 external forces force1, force2, torque1, torque2):

• ground_force1_vx, ground_force1_vy, ground_force1_vz,
• ground_force1_px, ground_force1_py, ground_force1_pz,
• ground_force2_vx, ground_force2_vy, ground_force2_vz,
• ground_force2_px, ground_force2_py, ground_force2_pz,
• ground_torque1_x,  ground_torque1_y, ground_torque1_z,
• ground_torque2_x, ground_torque2_y, ground_torque2_z

The data previewer expects groups of 6 columns for a force of the form “body”_”ForceName”_{vx, vy, vz, px, py, pz}, where vi corresponds to each component of the force and pi corresponds to each component of the location of the force (e.g., center of pressure) and 3 columns for a torque of the form “body”_”TorqueName”_{x, y, z}, corresponding to each component of the applied torque. Note that this naming convention is only necessary for previewing purposes. OpenSim tools employ an External Loads user interface enabling you to specify an arbitary number of forces, along with points of application, or torques to a model during any simulation or analysis.

Previewing Transformed Data

For any kind of previewed data (e.g., marker trajectories or ground reaction forces), you can visualize the effect of a rigid-body-transform applied to the data and save the data as a new file. 

However, the visualization is transformed to enable you to modify the preprocessing tools, as needed. To access the visual transformation dialog window: 

Transform Data Previewer Window

Right-mouse click on the navigator node corresponding to the motion file viewed (e.g. subject_01_walk1.trc in the example above). Choose Transform from the drop-down menu. Double click on any listed folders to display the list of markers (e.g. Lab Frame in the example at right). Use the arrow buttons to change the angle for Rotate X, Rotate Y, and Rotate Z; this will transform the data in the viewer (and in the viewer only – not the data file itself).  Angles are always positive (0-360 degrees).  Translations can be previewed by modifying the display offset.  The data file itself is NOT modified by OpenSim; the data previewer just displays the transformed data, so that the appropriate transformation(s) may be determined and applied during preprocessing.

Preview of Motion Capture Data in OpenSim

Select the marker data and grf data to sync the data and visualize the ground reaction forces with the marker motions. See Loading Motions for more information about how to sync motions.